Independent Testing
Stone-look surfaces tested by Eurofins.
Samples of our printed stone-grain surfaces were tested by Eurofins Consumer Product Testing Vietnam (Ho Chi Minh City) in October 2026. All four reports: Pass.


Pass
UV Exposure
ASTM G154-23, Cycle 7
- Method
- 144 hours of UVA-340 light, water spray and condensation cycles.
- Result
- Pass — grey-scale grade 4.5 (5 = no change); no visible change.
- Sample
- Cement with printed stone-grain finish
- Report
- EFUZ26094615-CG-01 · 8 Oct 2026

Pass
Coating Adhesion — on cement
ASTM D3359-22 (Mod.)
- Method
- Cross-cut grid, tape applied and pulled off to check for coating removal.
- Result
- Pass — grade 4B (less than 5% of the area affected).
- Sample
- Cement with printed stone-grain finish
- Report
- EFUZ26094616-CG-01 · 6 Oct 2026

Pass
Coating Adhesion — on tempered glass
ASTM D3359-22 (Mod.)
- Method
- Cross-cut grid, tape applied and pulled off to check for coating removal.
- Result
- Pass — grade 4B (less than 5% of the area affected).
- Sample
- Tempered glass with printed stone-grain pattern
- Report
- EFUZ26094740-CG-01 · 6 Oct 2026


Pass
Extreme Temperature Change
Eurofins ERF-HLITM-0018
- Method
- 24 hours at 0°F (−18°C), then 24 hours at 160°F (71°C).
- Result
- Pass — no yellowing, cracking or damage on either sample.
- Sample
- Cement with printed stone-grain finish (2 samples)
- Report
- EFUZ26094739-CG-01 Revised 1 · 6 Oct 2026 (revised 9 Oct 2026)
Results apply to the samples tested, as stated in each report. Full reports are sent on request. Request all reports
Audits & Registration
Responsible manufacturing.

amfori BSCI
Social compliance audit

SMETA
Sedex Members Ethical Trade Audit

MOIT (Bộ Công Thương)
Registered with Vietnam’s Ministry of Industry and Trade
Audit reports are available on request.
